Installation into compact facilities and direct operation below the robot with linear-motion and swivel axes combined with a ceiling-mount.
X-Axis stroke|450・760・1060mm
Z-Axis stroke|135・200mm
Maximum payload|5kg
Cycle time|0.56 sec
The ceiling-hung structure, which maximizes the motion range, is adopted.
By combined the motion of linear-motion and swivel axes, the speed is improved by 17% (P-P motion) compared to our conventional Cartesian robots.
Item | Unit | Specifications | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Model name of robot unit(*1) | - | XR-4341* | XR-4371* | XR-4372* | XR-4373* | XR-43A1* | XR-43A2* | XR-43A3* | |||
Axes | - | 4 | |||||||||
Position detection | - | Absolute encoder | |||||||||
Drive motor and brake | - | AC servomotors for all joints / Z-axis equipped with brake | |||||||||
Overall arm length(first arm + second arm) | mm | 200 | 250 | 300 | 200 | 250 | 300 | ||||
Motion angle and stroke | X(1st-Axis) | mm | 450 | 760 | 1,060 | ||||||
R(2nd-Axis) | ° | ±168 | |||||||||
Z(3rd-Axis) | mm | *=1:135、*=2:200 | |||||||||
T(4th-Axis) | ° | ±360 | |||||||||
Maximum payload | kg | 5 | |||||||||
Maximum composite speed (at the center of an end-effector mounting face) |
At the center of the hand mounting flange | mm/sec | 3,650 | 3,600 | 3,240 | ||||||
Z | 1,500 | ||||||||||
T | °/sec | 720 | |||||||||
Position repeatability(at the center of an end-effector mounting face)(*2) | X+R | mm | ±0.015 | ||||||||
Z | ±0.01 | ||||||||||
T | ° | ±0.005 | |||||||||
Maximum allowable inertia moment (Inertia) |
kgm2 | 0.05 | |||||||||
User air piping | - | 1 system (φ8) (with optional manifold valve : 4 systems(φ4X8)) | |||||||||
User signal line | - | 10(for proximity sensor signals, etc.) | |||||||||
Air source | Operating pressure | Mpa | 0.05 - 0.35 | ||||||||
Maximum allowable pressure | 0.59 | ||||||||||
Weight(*3) | kg | Approx. 33 | Approx. 45 | Approx. 46 | Approx. 47 | Approx. 51 | Approx. 52 | Approx. 53 |
Standard type | |
---|---|
XR-43*** | Download |
Group | Item | Q'ty |
---|---|---|
Robot & Accessories | Robot unit | 1 |
Motor & encoder cable (option) | 1 | |
Sheet of direction indicator labels | 1 | |
Connector set for hand control signals (for CN20 and CN21) | 1set | |
Eyebolts (for transportation) *Attached to the robot unit when shipped. | 2 | |
Controller & Accessories | Robot controller | 1 |
Power cable (5 m) | 1 | |
Pendantless connector (Dummy connector) | 1 | |
Cable clamp | 1 | |
Software etc | WINCAPS III trial version installer disc | 1 |
Manuals ("Manual Pack disc" and "Safety Precautions") | 1set | |
Warning label | 1 |
Type | Item | ||
---|---|---|---|
I/O cables | Standard I/O cable set | Consisting of 8-m I/O cables for "Mini I/O" and "HAND I/O." |
|
Consisting of 15-m I/O cables for
"Mini I/O" and "HAND I/O."
|
|||
I/O cable for "Mini I/O" (68 pins) | 8 m | ||
15 m | |||
I/O cable for "HAND I/O" (20 pins) | 8 m | ||
15 m | |||
I/O cable for "Parallel I/O board" (96 pins) | 8 m | ||
15m | |||
Operation devices | Teaching pendant | With 4 m cable | |
With 8 m cable | |||
With 12 m cable | |||
Mini-pendant kit (Incl. WINCAPS III Light version) |
With 4 m cable | Japanese language version | |
English language version | |||
With 8 m cable | Japanese language version | ||
English language version | |||
With 12 m cable | Japanese language version | ||
English language version | |||
Pendant extension cable | 4 m | For TP / MP | |
8 m | For TP / MP | ||
For VS | External battery unit | With 4 m cable | |
With 8 m cable | |||
With 12 m cable | |||
Brake release unit | With 4 m cable | ||
With 8 m cable | |||
With 12 m cable | |||
Air purge unit | Only for protected type robots | ||
Second arm cover R (with tapped holes) for VS-050 / 060 |
Only for standard type robots(IP40) | ||
Second arm cover R (with tapped holes) for VS-068 / 087 |
Only for standard type robots(IP40) | ||
Stopper bolt M8 for J2 mechanical ends for VS-050 / 060 |
For the 2nd axis | ||
Stopper bolt M5 for J3 mechanical ends for VS-050 / 060 |
For the 3rd axis | ||
Stopper bolt M10 for J2 / J3 mechanical ends for VS-068 / 087 |
For the 2nd and 3rd axes | ||
For HM | Flange kit | For 20 kg payload | |
For 10 kg payload | |||
For HS | Flange kit | For 5 kg payload | |
For XR | Valve assembly 4-station manifold valve |
Single shipment (supply part) | |
Robot mounting shipping | |||
Hand control cabling kit | - | ||
Hand control cable | 2m |
Item / Specifications | ||
---|---|---|
VM/VP/HM/HS/XR Series Standard cable (for standard type) |
Straight | 2 m |
4 m | ||
6 m | ||
12 m | ||
20 m | ||
Angle | 2 m | |
4 m | ||
6 m | ||
12 m | ||
20 m | ||
VM/VP/HM/HS/XR Series Splash-proof cable (for dust- & splash-proof type and cleanroom type) |
Straight | 2 m |
4 m | ||
6 m | ||
12 m | ||
20 m | ||
Angle | 2 m | |
4 m | ||
6 m | ||
12 m | ||
20 m | ||
For VS-050/VS-060/ VS-068/VS-087 |
Straight | 2 m |
4 m | ||
6 m | ||
12 m | ||
20 m | ||
Angle | 2 m | |
4 m | ||
6 m | ||
12 m | ||
20 m |
Type | Item | ||
---|---|---|---|
Optional boards for the robot controller RC8 series |
Parallel I/O board (PCI board) |
NPN type I/O | Shipped after mounted on the controller (With license) |
Shipped separately as a spare part (With license) |
|||
Shipped separately as a spare part (Without license) |
|||
License certificate only | |||
PNP type I/O | Shipped after mounted on the controller (With license) |
||
Shipped separately as a spare part (With license) |
|||
Shipped separately as a spare part (Without license) |
|||
License certificate only | |||
DeviceNet slave board (PCI Express board) |
Mobile unit | Shipped after mounted on the controller (With license) |
|
Shipped separately as a spare part (With license) |
|||
Shipped separately as a spare part (Without license) |
|||
License certificate only | |||
CC-Link remote device board (PCI Express board) |
Shipped after mounted on the controller(With license) | ||
Shipped separately as a spare part(With license) | |||
Shipped separately as a spare part(Without license) | |||
License certificate only | |||
PROFIBUS slave board (PCI Express board) |
Shipped after mounted on the controller(With license) | ||
Shipped separately as a spare part(With license) | |||
Shipped separately as a spare part(Without license) | |||
License certificate only | |||
EtherNet/IP Adapter board (PCI Express board) |
Shipped after mounted on the controller(With license) | ||
Shipped separately as a spare part(With license) | |||
Shipped separately as a spare part(Without license) | |||
License certificate only | |||
Electric Gripper Control board (PCI board) |
Shipped after mounted on the controller(With license) | ||
Shipped separately as a spare part(With license) | |||
Shipped separately as a spare part(Without license) | |||
License certificate only | |||
VGA option for RC 8 | VGA junction cable set*1 | VGA junction cable VGA connector is mounted on the controller before shipping. |
|
Options for Installation | Stay set for wall-mount | Wall-mount / Floor-mount |
Item / Specifications | ||
---|---|---|
For HS·HM·VM·VP·XR Series VS-6556·VS-6577 Standard cable (for standard type) |
Straight | 2 m |
4 m | ||
6 m | ||
12 m | ||
20 m | ||
Angle | 2 m | |
4 m | ||
6 m | ||
12 m | ||
20 m | ||
For HS·HM·VM·VP·XR Series VS-6556·VS-6577 Splash-proof cable (for dust- & splash-proof type and cleanroom type) |
Straight | 2 m |
4 m | ||
6 m | ||
12 m | ||
20 m | ||
Angle | 2 m | |
4 m | ||
6 m | ||
12 m | ||
20 m | ||
XYC Series Standard cable |
Straight | 4 m |
6 m | ||
For VS-050/VS-060/ VS-068/VS-087 |
Straight | 2 m |
4 m | ||
6 m | ||
12 m | ||
20 m | ||
Angle | 2 m | |
4 m | ||
6 m | ||
12 m | ||
20 m |
If you have not registered
The services on this member site are available only for registered customers.