This is a remote control function that operates a manipulator (Slave) at a remote location according to a command from the operation device (Master).
Compatible robots: All RC9-and RC8-compatible robots
Using the collaborative robot "COBOTTA" as a master device, you can intuitively operate a large robot by moving the arm of COBOTTA.
In addition, by utilizing the virtual fence function, you can specify the operating range of the slave robot, ensuring safety.
・Intuitive robot teaching and operation is possible even if you are not accustomed to programming.
・Operation from outside a clean environment such as in the pharmaceutical manufacturing process is possible. This prevents foreign matter from entering and workers from being contaminated. *1
To use the function, a "Mirror Control" extension license is required.
*1: In consideration of safety, use is limited to within the range where the slave robot can be seen and within the maximum reach of the cable, which is 20 m.
Total arm length (1st arm+ 2nd arm) | 342.5(165+177.5)mm |
---|---|
Rated load capacity (Maximum payload) | 0.5kg (0.7 kg wrist direction downward within ± 10 degrees) |
Position repeatability | ±0.05mm |
Degree of protection | COBOTTA unit:IP30 AC adapter and AC cable:IP20 |
If you have not registered
The services on this member site are available only for registered customers.