For Wide Range of Applications from Extremely Small Codes to Long Distance Scanning
The FD2 is a stationary scanner with a two-megapixel high-resolution sensor that can stably scan codes printed on both very small and large parts. Its palm-sized body is easy to install even in congested production lines. It contributes to DX at production sites by integrating the functionality needed to scan a wide variety of workpieces.
It can also scan the new QR code “rMQR Code,” which enables printing in long, narrow spaces. It supports a broad range of applications. (The latest firmware update is required to scan this code.)
Type |
Standard field-of-view model |
Wide field-of-view model | |||||
---|---|---|---|---|---|---|---|
Model |
FD2-HS1000-ERU |
FD2-HW1000-ERU |
|||||
Scanner section | Sensor |
Image sensor 1600 x 1200 pixels |
|||||
Readable codes | 2D code |
QR Code, SQRC, Micro QR Code, rMQR Code, DataMatrix(ECC200), PDF417, Micro PDF417、Maxi Code、GS1 Composite(GS1 DataBar Composite) |
|||||
Barcode |
EAN-8/13、UPC-A/E(Add-on embedded)、CODE39、CODABAR(NW-7)、 |
||||||
Minimum resolution | 2D code |
0.06 mm |
|||||
Barcode |
0.08 mm |
||||||
Scanning distance |
110~1200 mm |
50~720 mm |
|||||
Scanning field of view |
185×148 mm(at scanning distance of 600 mm) |
384×307 mm(at scanning distance of 600 mm) |
|||||
Adjustment |
Auto-focus, lighting and filter auto-tuning |
||||||
Number of scanning parameter settings |
16 |
||||||
Communication | Interface |
Ethernet、RS-232C |
|||||
Industrial protocol |
EtherNet/IP、ORiN Supported |
||||||
Control I/O |
Input:2 pins, Output:3 pins |
||||||
Input power |
DC24V±10% |
||||||
Protection class | Protection class | IP65 | |||||
Operating temperature range |
-10~45℃ |
||||||
Vibration resistance |
Vibration frequency of 10 to 500 Hz, Sweep of 11 min., Single-amplitude of 75 mm (Acceleration upper limit of 100 m/s2) |
If you have not registered
The services on this member site are available only for registered customers.